Verstak technical workshop workbenches

   1819

Verstak series is technical workshop workbenches with increased rigidity that are more lasting. The ultimate strength is reached because of a number of tabletops, supports and additional equipment. The load capacity of tabletop is over 500 kg. Standard width is 630 mm and standard height is 800 mm plus tabletop’s depth.

This series of technical workbenches will be very suitable for work in the production area, because of its durability. There are a large number of tough tools on factories, and other production workplaces, so Verstak will be good for it. To put a heavy instrument on Verstak workbench will not a problem. You also can store more tools than on the other workbenches.

There are five different types of worktops for the Verstak workbench. Four 21 mm plywood. There are plywood with light gray plastic edges, one with light gray plastic edges, covered with a 6 mm dark gray metal sheet. Also there’re plywood covered with a dark gray metal sheet 2 mm thick, the latter bent around the edges and a combined table top coated with 6 mm Shockproof, resistant to abrasion and mechanical impacts, with grey plastic edges on four sides. There is also a dark gray metal sheet 6 mm thick.

There are also five different variants of footings for these workbenches. Four cabinet units: one with five drawers on telescopic runners and a lock, one with three bigger drawers on telescopic runners and a lock, one with two shelves and a lock, and one with one drawer and two shelves in a locked section. And legs. These supports can be composite, but 1200 mm width Verstak workbenches must have legs as one of supports.

We offer you a choice between three widths of Verstak workbench: 1200, 1500 and 1800 mm. You can improve the workbench by the main shelf and additional shelf. Besides, you can pick a lot of additional equipment. Such as, drafts holder and monitor holder, power panel and a perforated panel. Rear racks are appended automatically. Verstak workbench allows a choice between 60 cm or 90 cm length local under-shelf LED lighting. There is also a possibility to choose between standard and LED upper workbench lighting.

The full list of equipment you can watch on https://viking-esd.com/production/workbenches_series/verstak_workbenches/

We also suggest you to watch some related products for Verstak workbench, such as VKG C-100 ESD Chair, Reinforced shelvings and SUS movable packing trolley.